Showing posts with label repurposed t-shirt. Show all posts
Showing posts with label repurposed t-shirt. Show all posts

Monday, May 6

Make a Tie Dyed T-shirt Purse

It's my mission this summer to make chic and stylish Tie Dyed projects.  Tie dye doesn't have to be stuck on Dead Tour or at summer camp.  The trick is a mixed media approach, with several layers of dye and paint creating the look of seaweed swaying on the ocean floor.  Best of all, you don't even have to sew! Fun, fast and fabulous!
You will need
Size Medium or Large men's white COTTON t-shirt (pre-washed)
2 bamboo round purse handles
8 metal grommets
Sewing pins
Tulip Tie Dye in lime and teal
Tulip Fabric Spray Paint in metallic teal and neon green
Tulip Soft Fabric Paint olive and turquoise 
Bubble wrap
Scissors
Grommet setting tool

1.) Wet shirt.  Place on sheeting.  Slide pinched fabric into fork and twirl.  Repeat for entire front of shirt, making rosettes.  They should be swirling in different directions. 
2.) Mix dye according to instructions.  Squeeze into plastic containers.
3.) Use a brush to paint green dye on raised areas of shirt.  Leave some areas white.
4.) Use second brush to paint blue dye on remaining raised areas of shirt.  
5.) Turn shirt over and repeat process on back.  Cover with plastic and allow to set for 4 hours. 
Wash and dry shirt.
5.) Spray blue and green Tulip fabric spray on shirt, the idea is to add just a little more color and some texture here.  Be judicious.  6.)  Cut shirt from bottom of arm pit to center of collar on an angle on both sides.  (Save scraps for other projects!)  Measure from edge at the bottom of original arm pit area three inches, mark and cut straight across removing the pointed top on front and back half of shirt.  There should be two 3" wide flaps at the top of both sides. 7.) Turn shirt inside out.  Fold edges and iron.  Add a thin bead of glue along the edges and pin using sewing pins.  Allow to dry.  8.)  Glue along bottom of shirt at the original seam.  Pin and allow to dry.  (Be thorough here, this is the bottom of your shirt.  If you want to sew this, feel free!)
9.) Cut a section of small bubble wrap into three pointed waved shapes.  These are about 2" wide at the bottom. (These are meant to look like seaweed, but they also look a little like octopus tentacles so you could go that direction if you choose!) Squeeze blue and green Tulip Soft Paint on a plate and use pouncer to gently pounce paint on bubble wrap. Don't mix the colors up, put some blue here and some green there to give it variety.  10.) Press bubble wrap across on bottom edge of purse fabric.  Move across bottom edge, leaving a small space between each tendril.  11.  They should look like this when you lift them up.  12.) Use pouncer to add some detail to the stamped areas and in between.  ALLOW TO DRY COMPLETELY!
13.) Fold top left edge of fabric over purse handle and use a grommet setter to attach edge, slide it down another 2" and repeat.  Do this on all four sides for both handles.  One handle for the front and one for the back side of your pouch.  14.) Use fabric tape to attach folded edges around handles.  Work slowly across from one edge to the other, spreading fabric out as you work. You can scrunch it back down after it has set.  
I am so happy with how this turned out, I plan on making more of these purses!  It's amazing what you can do with a few inexpensive materials and a lot of imagination.  Can you believe this started out as a t-shirt?  Don't forget to visit our new Tie Dye Your Summer website for techniques and projects you are going to love. And if you want more stylish DIY and fashion ideas, visit my new site DIY Doyenne!  
xoxo,
Madge

Thursday, October 14

31 Days of DIY Halloween - BOO-ti-ful Spirits Banner

boo banner

Would you believe this cute banner is made from a black t-shirt? Whether you’re making it for your front door, your office cubicle, or your Halloween party, it will be terrific when you turn out the lights, because the 3-D paint GLOWS in the DARK!

BOO-ti-ful Spirits Banner
Designed by Cheryl Ball

Materials:
Aleene's® Fabric Fusion® Permanent Dry Cleanable Fabric Adhesive
Tulip® Craft Mat™
Tulip® 3D Fashion Paint™ Value Packs and Sets
10 pack Glo
– Ribbons – assorted colors desired
– Paper towels
– White chalk – sharpened to a point
– Scissors
– Straight pins
– T-shirt – Black – XL
– Patterns (click here)

Instructions:
1. Cut out banner pattern then pin to double layer of black T-shirt. Cut out then repeat step creating a total of four pennants.

2. Flip over design pattern. Using white chalk, lightly draw over pattern lines holding up to window if needed to see lines.

3. Position first pattern, chalk side down, on first fabric pennant and hold in place. Press fingers along pattern lines to transfer design to fabric. Repeat with all designs and pennant pieces.

4. Place fabric pennant on Craft Mat – it will prevent paint from seeping through to work surface and is easy to clean. Test flow of paint on paper towel using an even pressure on bottle for a smooth line. Starting with first pennant, outline each section then fill in with color shown, applying an even coating. Use a straight pin to pop any bubble that may form. Carefully slide off Craft Mat and let dry. Repeat for remaining three pennants.

5. Measure and cut a 6-ft. length of ribbon for hanger. Center pennants along ribbon spacing approximately 4” between and leaving longer tails at each end. Apply a thin bead of Fabric Fusion on ribbon, position banner section in place and press to secure.

6. Using ruler on Craft Mat, measure and cut 8” sections from ribbons, cutting enough for about four ribbons between each pennant and at ends. Tie around long hanger ribbon as shown.

Craft on! Click here for today's daily giveaway!
Clicky Web Analytics
Pin It button on image hover

Subscribe to our newsletter

* indicates required
I am interested in products and inspiration for...
Close