Temporary Furniture Makeover

 

Sometimes you don't want to spend big bucks on furniture. I was pretty sure that I wanted a black TV stand but I wasn't positive about it. Rather than spend tons of money on one, this one came from Walmart instead. It's nice looking and does its job but it's starting to show signs of wear, most of which is incurred when my nephews visit! Wanting a change but not sure what I wanted (again) I went with a temporary design solution using Aleene's Repositionable Tacky Spray that only cost me TWO BUCKS!

DIY Rocker T-Shirt

Using the Tulip Screen-it and some scissors you can turn a boring t-shirt into a fun printed tank for summer. For this project I used one of my husbands old t-shirts, since it’s a little large, once it’s tied it works perfectly. The t-shirt I used has David Bowie on it, so I created a graphic of a lightning bolt and used the Tulip Screen-it which is really easy! I was amazed! Follow the instructions on the ILTC website and you’ll be able to create your own awesome t-shirt designs in no time!

TOOLS & MATERIALS:

1 T-shirt a few sizes larger than normal

Tulip Screen-it

Tulip Soft Fabric Paint

Aleene’s Tacky Spray

Graphic image

Scissors

Ribbon

Aleene’s Fabric Fusion (optional)

Timer

Sponge

step 1

Choose your design and print it out in black ink. It’s very important that your image is dark.

Find a room in your house that you can make a dark room. Cover every possible place that light could get in.

Set up a plastic bin with enough water to soak your film once you’ve burned your screen or use your tub, if your bathroom works best for your darkroom. That’s what I did.

Once your room is ready, use the yellow light bulb as your only source of light.

Be sure to have all your supplies with you, Aleene’s Tacky Spray, your films, your graphic, the Screenit, squeegee and a timer before you get started.

step 2

Spray the base of your Screen-it with the Aleene’s Tacky Spray and place your film on top of the base. Use your squeegee to smooth out any bubbles.

Next, spray the design side of your graphic with the Aleene’s Tacky Spray and place it graphic side down on your film.

Place the frame and the top of the Screen-it on top of your graphic.

step 3

Turn on your Screen-it for 8 minutes.

When your 8 minutes are up lift the top of your Screen-it, rotate it 180 degrees, set it back on top and turn it on for another 8 minutes.

You will use your Screen-it for a total of 16 minutes.

step 4

When that is finished, peel your graphic off your film and submerge your film in your pan or tub of water and let sit for 10 minutes.

This is where you’ll see your design emerge!

step 5

When your 10 minutes are up, lay your film on top of the base from your Screen-it and using a sponge (soft side only) rub your film under running water.

This will loosen the emulsion on your film, revealing your image.

Let your film dry.

For more detailed instructions on using the Screen-it click here.

step 6

Now you’re ready to print your shirt.

Lay your t-shirt out on a flat surface.  

Use the base of your Screen-it inside your shirt, this will provide a hard surface to screen on and keep any paint from soaking through.

Spray the area of your shirt with Aleene’s Tacky Spray and place your film on top.

Place the frame of your Screen-it on top of your film. 

step 7

Apply a generous amount of your Tulip Soft Fabric Paint across the top of your design.

Hold the top of your film with one hand and use your squeegee to pull the paint across your design with your other hand. Be sure to add even pressure with your squeegee as your pull it across.

You may need to do this a couple of times. Depending on the color of your shirt and your paint.

My image is a bit light, since I used silver paint on a dark gray t-shirt, but I wanted a vintage faded look. Using lighter colored t-shirts will give you a stronger color with your fabric paint.

Let your image dry.

Be sure to rinse out your film when you are done, it can be reused many times!

step 8

Now you’re ready to cut your t-shirt.

Lay it out flat and cut off the sleeves and the bottom band.

Cut the neck in large scoop shape, you can go slowly with this and keep trying it on as you go. That will keep it from getting too big to wear.

Cut the back of your t-shirt lower than the front.

step 9

When your t-shirt is cut the way you want it, you’re ready to tie the back.

Using a ribbon or the bottom strip of your t-shirt or whatever you like, wrap your two back shoulder straps with your ribbon and tie in a bow.

 

step 10

The front of my t-shirt was puckering a bit (since I’m not much of a busty gal) I used Aleene’s Fabric Fusion to hold small tucks on either side of the neckline.

I also used the Fabric Fusion to hold the bow, just a few drops inside the knot, to keep it from untying.

I had so much fun using the Screen-it, in a really short time you can create fun graphics for t-shirts and so much more! Also, this way of turning a t-shirt into a tank is a great way to keep those old t-shirts from ending up in the rag pile! You could also use small adult or teen sizes to make tops or dresses for girls! I guess I know what my daughter will be wearing this summer!

To see more DIY fashion be sure to check out my blog at Trinkets in Bloom.

DIY Screen Printed Canvas

 Small canvases are very inexpensive at the craft stores.  With just a little effort, they can pack a big design punch!  This time around I've used some graphic Ikat style fabric, which we stretched and stapled around the original canvas.  Then I created a pretty permission free graphic (you'll find it below) that I burned on a screen using the Tulip Screen-It.  This was so easy to do and if you follow the video instructions on the ILTC website, you'll have a stunning screen you can use up to 75 more times! Simply fabulous!

You will need:

12"x12" blank canvas

Black Tulip Soft Fabric Paint

Aleene's Repositionable Tacky Spray

Tulip Screen It

Painter's Tape

Staple Gun and Staples

 1.) Print your image in black ink.  Set yourself up in a light free room with the ScreenIt and a small lamp with the yellow bulb provided in the machine.  Turn off over head light and turn on yellow bulb.  You'll need to spray the platform, place the screen on the platform.  Use squeegee to remove any air bubbles.  Spray your image, place image down on screen, use squeegee to remove any air bubbles.  Place cover on top, turn machine on and burn screen for 8 minutes.  8 minutes later, turn top of machine 180 degrees, turn back on and burn screen for an additional 8 minutes.  2.)  Soak screen in a tub of cool water for 10 minutes.  Gently rub the emulsion off of the burned areas with your fingers while screen is submerged.  Remove from water and use a soft sponge to remove remaining emulsion from the burned areas, you can do this on your printing platform.  3.) Set the screen on a towel to dry.  4.) Cut fabric to fit around edges of canvas.

5.) This is a two person job, really, but you can do it alone if you work slowly and methodically.  Stretch fabric tight and staple, start with the center and work out to sides, three staples per side is good.  To get the sides done, you will need to cut a little square off of one side of the folded fabric, then tuck, fold and staple.  6.) Tape the screen flat to the front of your canvas with painter's tape. Make sure there are no bubbles, you don't want the paint to spread outside of the printed areas. 7.) Place canvas on Screen-It platform.  Squirt out a thick line of paint and squeegee it across the screen.  8.) Remove tape and screen and let your canvas dry.

 Here is the image I used, just right click and save to your computer.  Print to fit 8.5x11 in jet black ink.

It's so much fun to screen print, you may find it just a little addicting.  I'm thinking about using my screen on some t-shirts and maybe even some pillows for our outdoor porch.  Have you ever screen printed?  What would you like to create with the Tulip Screen-it?

Get more great DIY tutorials on iLovetoCreate.com and find more DIY Fashion and Style at DIYDoyenne.com!

Cheers,

Madge

"Hall of Fame" Board

Now that both of my little guys are bring projects home from school I wanted a prominent place to put their work on display.  So, I made this "Hall of Fame" board so we can hang those cherished items for a while.

I purchased a bulletin board first.

And then I cut some fabric to cover the bulletin board - just to give it a more finished look.  

After ironing the fabric I used a little bit of Aleene's Tacky Spray to attach the fabric to the bulletin board and then I tucked the edges of the fabric into the frame with a butter knife.

Then I used the new Scribbles Fabric Stamp Pads and the Scribbles Alpha Stamp Kit to write "Hall of Fame" on the fabric.

 

Now it's ready to hang anything special.