iLoveToCreate As Time Goes By Mixed Media New Year's Necklace

"You must remember this,

A kiss is just a kiss,
A sigh is just a sigh.
The fundamental things apply,
As time goes by."
As Time Goes By by Herman Hupfeld

I couldn't resist another silhouette project for New Year's Eve after I recalled this lovely Dover books image. This delightful necklace is a small momento of an evening that will pass far too quickly. We spend New Year's with our family noshing on tasty appetizers and playing games. This seemed like the perfect something extra to give Avalon on New Year's this year. Shhh...don't tell it's a surprise!

The image is permission free and available from Dover Books. The text is easy to print out on your computer, use an ink jet if you want to create an image transfer with Collage Pauge. The Tulip crystal accents add some sparkle and the gun metal chain carries through the Victorian feel.

As Time Goes By
Mixed Media Necklace
iLoveToCreate Teen Crafts
Copyright 2009 Margot Potter
"Mom crafted, kid approved."


Materials
1.5" gun metal finish pocket watch locket (or other round metal frame with glass will work)
Dover silhouette sized to fit inside of the locket/frame
10 4mm clear AB CRYSTALLIZED-Swarovski Elements bicones
Printed "Happy New Year 2010" in French Script MT 22 pt.
1.5" clear acrylic Tim Holtz idea-ology Fragments oval
Tim Holtz idea-ology gun metal link chain
Traci Bautista's Collage Pauge Glossy
Aleene's Glass and Bead Slick Surfaces Adhesive
Aleene's Quick Dry Tacky Glue
Aleene's Stop Fraying
Tulip Glam It Up clear crystals
20 gauge annealed iron wire

Tools
Pen or pencil
Scissors
2 pairs chain nose pliers
Round nose pliers
Memory wire shears
Electric Drill with 1/6" bit

1. Size image to fit your frame. Print image and adhere to inside of frame with a thin layer of Collage Pauge. Allow to dry. While drying adhere a crystal accent using Tacky Glue. Before you close the frame, if you are using a locket style, add the crystal bicones.



2. Mark and drill a hole in the bottom center of your acrylic tile.

3. Print text. Trace around text using acrylic shape as a guide. Cut out and adhere text to back of shape with Collage Pauge. Spread a thin layer of Collage Pauge on the back. Allow to dry but not completely, so for about five minutes or so. When still a little wet GENTLY remove upper layers of paper from back of tile. I left paper in the center under the text because I liked the cloudy, vintage look it created. If you want to remove all of the paper, allow the paper to dry completely, wet your finger and gently remove paper by rubbing it off in thin layers. This creates an image transfer, but be aware that you may lose some of your text if you remove all of your paper.

4. Glue crystals to right front edge of your acrylic tile with Slick Surfaces adhesive. Allow to dry. (A toothpick with bee's wax or the Quicker Poker Picker Upper Tool will help you transfer the crystals from the glue to the tile.)

5. Cut a 2" section of annealed iron wire with Memory Wire shears. Bend the center of the wire over your index finger to create a hook shape. Use pliers to bend one hook end into a larger loop that will fit into the drilled hole of your acrylic tile and one into a loop small enough to fit inside of your chain link using your round nose pliers to assist you. See photo for reference. (I have detailed tutorials with pictures for this in my books if you need further instruction.)

6. Create 10mm annealed iron jump rings by wrapping the wire around a 10mm dowel and using the Memory Wire shears to clip the coil you've removed from the dowel into rings. (I have detailed tutorials with pictures for this in my books.)

7. Attach the hook to the bottom of your acrylic tile using chain nose pliers to secure hook closed.

8. Attach the chain to the top of your acrylic tile using a jump ring. Attach a jump ring to the top of your locket and slide this on the chain.

9. Finish by tying a small bow around the jump ring at the top of your acrylic tile. Seal the ribbon ends with Aleene's Stop Fraying.